How to paint a bicycle frame?

To begin with, the drawing the frame needs to be exempted from all details that are not subject to coloring and then it is good to wash. If it is important to leave certain drawings or logos, it is desirable to stick them precisely on a contour with an adhesive tape, having protected thereby from paint penetration.

After that cleaning of a frame follows. It is required to level a surface and to make her opaque for the best coupling of materials. It is necessary to smooth out, using a rough abrasive cloth with water. At the same time, it is enough to bring down luster on an old covering. Moreover, if it is decided to get rid completely of an initial paint layer, it is possible to process a surface special structure – a washing of old paint.

However, peeling the paint, it is necessary to consider that there is one more layer – couch. It is extremely undesirable to delete him to metal. The matter is that at the plant the frame is grounded in a heated state – it promotes good adhesion and sticking of a couch.

Also at this stage, it is possible to eliminate dents, impressive scratches, and other serious defects if they exist. It is carried out by means of cold welding. At last, degreasing of a surface by the corresponding structure will become the last preparatory action. It is made for removal of unnecessary microparticles.

And now let us talk a little more detailed about a use of the couch. Even at preservation of a factory layer primer at least by places will be required to be produced if, of course, the purpose is to paint a bicycle frame qualitatively. Couch will help to correct defects on an alignment of a surface and will protect it from corrosion. And, above all, by means of it, the colorful covering will be fixed much more reliably.

It is more convenient to work with the suspended frame. It is necessary to fix a detail so that it was possible to approach it from any party. It is necessary to take care also of good ventilation of the room. Besides, during the work with the chemical compositions, it is strongly recommended to use a respirator.

The couch should be applied with a paint sprayer. It is necessary to apply on the processed surface two thin priming coats with a twenty-minute interval between the first and second drawing. For the avoidance of smudges, it is necessary to hold a paint sprayer at sufficient distance. In case of paint sprayer absence, it is necessary to buy one. The choosing the right of one, which is a fascinating question, by the way, is very important. Try to read as much as possible on the product-oriented websites.

Upon the end of the procedure, the frame needs to be dried. For reliability, it is necessary to take away for this purpose days, and more exact information can be found in the instruction to priming structure.

After the carried-out work, it is possible to start the main thing – coloring. What structure for this purpose to use? One of the options is a touch-up paint. Here you are able to choose any color that is pleasant to you. And for the special effect, it is recommended to make the first layer white.

The process of painting consists of the next steps.

First, it is better to spend less paint (but not to the detriment of the expected result), and it is no more as surplus can turn into negligent smudges.

Secondly, the surface should be degreased at first and only then to paint. And in the third, the put layers have to be accurate and thin for what it is necessary to work actively with a barrel, without going in cycles in one place. It is possible to be limited to two layers, but it isn’t less. Each of them has to dry out well.

If smudges, after all, were found, it isn’t necessary to try to trample down them hands. In this case, it is worth changing the provision of a frame: so the excess paint will evenly be distributed on a surface. It is necessary to leave the painted detail for days two to dry that it appeared the processing which is completely prepared for the final stage